| |
 |
|
|
Makita Power Cutter - 14in., 73cc, Model# DPC7331 |
|
 |
Gas-powered cutter has a 5-stage air filtration system, plus a 2-mass dampening system that significantly reduces vibration. Compression-release valve reduces start-up force by 70%, and air-inlet ports reduce noise by 40%. Features quick-action guard adjustment and the quickest cutting arm position change available.
Electronic ignition and carburetor provide smooth power transition at all ranges and compensate engine timing according to workload. Large volume exhaust system directs debris away from operator. Spring-tensioned belt adjustment with gauge, single knob access to primary air filter and spark plug, external clutch with vented housing and contoured padded grip for greater comfort.
Takes 1in. or 20mm arbor plates. Includes one abrasive blade. Engine Displacement (cu. in. (cc)): 4.5 (73),HP: 5.6,Speed (RPM): 9,350,Blade Diameter (in.): 14,Cutting Depth (in.): 4 13/16 - Five-stage, foam-paper-nylon system with Advanced Directional Air Flow provides very clean air for better saw performance
- Reinforced aluminum blade guard with 70% range of limitless positioning using a marked knob handle
- Improved ignition system with larger flywheel and rare earth magnets for more power
- Cutting arm position simply changes from center position to flush (outboard) position allowing cuts directly adjacent to curb edges, walls or directly above the ground
- Starter grip and decompression valve located on the same side for faster starting
- On-Off-Choke operating switch on a single lever for operator convenience
- Cushioned operator grips with 4 vibration-absorption rubber buffers for increased operator comfort
- Water kit is assembled to saw and can be used with garden hose, gravity tank or pressure tank
- Improved exhaust emissions are EPA Phase II compliant while maintaining power and performance
Engine
- Maximum power: 5.
6 HP/73cc - No load speed: 9350 RPM
Fuel
- Fuel mixture: 50:1
- Fuel tank capacity: 37 oz
Blades
- Maximum spindle speed: 4300
- Arbor: 20mm
.
Manufacturer: Makita
Part Number: 999601
MSRP: $1,259.99
Sale Price: |
|
Sale Price: $1,199.99
|
|
|
|
|
|
|
